TW100-BRV304 User Guide
Physical Details
Front-mounted LEDs
Power
Status (Red)
LAN
WAN
PPPoE
DMZ
Figure 2: Front Panel
On - Power on.
Off - No power.
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
For each port, there are 2 LEDs
•
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub) port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
On - Connection to the modem attached to the WAN (Internet) port is
established.
Flashing - Data is being transmitted or received via the WAN port.
On - PPPoE connection established.
Off - No PPPoE connection.
•
Link/Act
•
Blinking – receiving/ transmitting data
•
100
•
On -
Link at 100Mbps
•
Off -
Link at 10Mbps
4