Table of Contents
Advertisement
Subject Name
Hash Algorithm
Signature Algorithm
Signature Key Length
3. Click "Next" to continue to the following screen.
4. Check that the data displayed in the Certificate Details section is correct. This data is used
to generate the Certificate request. If the data is not correct, click the "Back" button and
correct the previous screen.
5. If the data is correct, copy the text in the Data to supply to CA panel to the clipboard.
6. Apply for a Certificate:
•
Connect to the CA's web site.
•
Start the Self Certificate request procedure.
•
When prompted for the request data, copy this data (including "-----BEGIN
CERTIFICATE REQUEST-----" and "-----END CERTIFICATE REQUEST-----")
from this screen to the CA's form.
•
Submit the CA's form.
•
If there are no problems, the Certificate will then be issued.
7. After obtaining a new Certificate, as described above, you need to upload it the TW100-
BRV304. Click the "Next" button to see the screen below.
This is the name which other organizations will see as the
Holder (owner) of this Certificate. This should be your
registered business name or official company name. Gener-
ally, all Certificates should have the same value in the
Subject field.
Select the desired option.
Select the desired option. RSA is recommended.
Select the desired option. Normally, 1024 bits provides
adequate security.
Figure 87: Add Self Certificate (2)
VPN
101
Advertisement
Table of Contents
