Table of Contents
Advertisement
TW100-BRV304 User Guide
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specify-
ing the Source and Destination addresses for the "Filter Properties". Instead, for both IP Filters,
the Filter Properties- Addressing should be completed as follows.
•
The Source Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on the TW100-BRV304's LAN.
•
The Destination Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on the Windows 2000 LAN.
Figure 83: Windows 2000 Server - Addressing
98
Advertisement
Table of Contents
