Rac Message; Registors Messages - Cisco WS-C2955T-12 Software Manual

Appendix A System Messages

RAC Message

This section contains the router autoconfiguration error message.
Error Message RAC-3-RACNOIPL: Cannot find lease information for interface [chars]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.

REGISTORS Messages

This section contains the hardware register error messages.
Error Message REGISTORS-3-ERRONREAD: [chars]: Failed to read [chars] register.
Explanation
Recommended Action
Copy the error message exactly as it appears on the console or in the system log. Enter the show
tech-support command to gather data that might provide information to determine the nature of the
error. If you cannot determine the nature of the error from the error message text or from the show
tech-support output, contact your Cisco technical support representative, and provide the
representative with the gathered information.
Error Message REGISTORS-3-ERRONWRITE: [chars]: Failed to write [chars] register.
Explanation
Recommended Action
Copy the error message exactly as it appears on the console or in the system log. Enter the show
tech-support command to gather data that might provide information to determine the nature of the
error. If you cannot determine the nature of the error from the error message text or from the show
tech-support output, contact your Cisco technical support representative, and provide the
representative with the gathered information.
78-6511-08
An internal error meaning that DHCP-lease information is missing for the interface.
Copy the error message exactly as it appears on the console or in the system log.
Failed to read a register.
If this is happening with all features on the switch, this is a hardware failure.
Failed to write a register.
If this is happening with all features on the switch, this is a hardware failure.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Error Message and Recovery Procedures
A-33