Front-Panel Images - Cisco WS-C2955T-12 Software Manual

Front Panel View

Front-Panel Images

You can manage the switch from a remote station by using the front-panel images. The front-panel
images are updated based on the network polling interval that you set from CMS > Preferences.
This section includes descriptions of the LED images. Similar descriptions of the switch LEDs are
provided in the switch hardware installation guide.
The Preferences window is not available if your switch access level is read-only. For more information
Note
about the read-only access mode, see the
Figure 2-5
on the front-panel image. The port is then highlighted with a yellow outline. To select multiple ports,
you can:
•
•
•
Figure 2-5
Table 2-2
status LED information, see the
Table 2-2
Wavelength
1470 nanometers (nm)
1490 nm
1510 nm
1530 nm
1550 nm
1570 nm
1590 nm
1610 nm
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
2-6
shows the port icons as they appear in the front-panel images. To select a port, click the port
Press the left mouse button, drag the pointer over the group of ports that you want to select, and then
release the mouse button.
Press the Ctrl key, and click the ports that you want to select.
Right-click a port, and select Select All Ports from the port popup menu.
Port Icons
describes the colors representing the wavelengths on the CWDM GBIC modules. For port
Port Icon Colors for the CWDM GBIC Module Ports
Color
Gray
Violet
Blue
Green
Yellow
Orange
Red
Brown
"Access Modes in CMS" section on page
"Port Modes and LEDs" section on page
Chapter 2 Getting Started with CMS
2-33.
2-8.
78-6511-08