Tac Messages - Cisco WS-C2955T-12 Software Manual

Error Message and Recovery Procedures
Error Message SYS-3-LOGGER_FLUSHED: System was paused for [time-stamp] to ensure
console debugging output.
Explanation
displayed on the console. To guarantee that they can be seen, the rest of the system was paused until
the console output catches up. This can break time-critical behavior, such as maintaining an ISDN
link.
Recommended Action
logging console guaranteed command, or turning off link-state messages for some interfaces.
Error Message SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
output.
Explanation
displayed on the console. To guarantee that they can be seen, the rest of the system is paused until
the console output catches up. This can break time-critical behavior, such as maintaining an ISDN
link.
Recommended Action
logging console guaranteed command, or turning off link-state messages for some interfaces.
Error Message SYS-6-READ_BOOTFILE_FAIL: [chars] [chars].
Explanation
Recommended Action
image did not load as configured, copy the error message exactly as it appears on the console or in
the system log. Enter the show tech-support command to gather data that might provide information
to determine the nature of the error. If you cannot determine the nature of the error from the error
message text or from the show tech-support output, contact your Cisco technical support
representative, and provide the representative with the gathered information.

TAC Messages

This section contains the Terminal Access Controller Access Control System Protocol error messages.
Error Message TAC-3-PICKCTX: No pick-context
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
A-44
Debugging or informational messages are being generated faster than they can be
Consider using conditional debugging, turning off console logging, using the no
Debugging or informational messages are being generated faster than they can be
Consider using conditional debugging, turning off console logging, using the no
A configured boot system command failed.
If a system image was eventually loaded, no action is required. If the system
The context to pick the next server has disappeared.
Copy the error message exactly as it appears on the console or in the system log.
Appendix A System Messages
78-6511-08