Snmp Messages; Spantree Messages - Cisco WS-C2955T-12 Software Manual

Appendix A System Messages

SNMP Messages

This section contains the Simple Network Management Protocol error messages.
Error Message SNMP-4-NOENGINEID: Remote snmpEngineID for [IP_address] not found when
creating user:[chars]
Explanation
agent (or SNMP manager) was not configured.
Recommended Action

SPANTREE Messages

This section contains the Spanning Tree Protocol error messages.
Error Message SPANTREE-2-BLOCK_PORT_TYPE: Blocking [chars] on vlan [dec].
Inconsistent port type.
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SPANTREE-2-BLOCK_PVID_LOCAL: Blocking [chars] on vlan [dec].
Inconsistent local vlan.
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SPANTREE-2-BLOCK_PVID_PEER: Blocking [chars] on vlan [dec].
Inconsistent peer vlan.
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
78-6511-08
An attempt to create a user failed. This is probably because the engine ID of the remote
No action is required.
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Error Message and Recovery Procedures
A-35