Assigning A Private Profile To An Lre Port - Cisco WS-C2955T-12 Software Manual

Chapter 7 Configuring the Switch Ports

Assigning a Private Profile to an LRE Port

Private profiles are set on a per-port basis. You can assign the same private profile or different private
profiles to the LRE ports on the switch. The default active private profile on all LRE ports is LRE-10.
The switch resets the ports with the updated profile settings.
Beginning in privileged EXEC mode, follow these steps to assign a private profile to an LRE port:
Command
Step 1
configure terminal
Step 2 interface LRE-interface
Step 3 lre profile profile_name
Step 4 end
Step 5
show controllers lre profile
mapping
Use the show controllers lre privileged EXEC commands to display the LRE link statistics and profile
information on the LRE ports. For information about these commands, refer to the switch command
reference.
78-6511-08
Purpose
Enter global configuration mode.
Enter interface configuration mode, and enter the number of the LRE port to
be configured.
Enter the private profile name: LRE-5, LRE-10 (default), LRE-15,
LRE-10-1, LRE-10-3, LRE-10-5, LRE-5LL, LRE-10LL, and LRE-15LL.
The default profile is LRE-10.
Return to privileged EXEC mode.
Verify the change.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Configuring the LRE Ports
7-23