Configuring Port Mirror - Cisco SLM2008PT-NA Administration Manual

Advanced Configuration
Admin
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

Configuring Port Mirror

You can mirror traffic from any source port to a target port for real-time analysis.
The target port speed should match or exceed source port speed, otherwise
traffic may be dropped from the monitor port. The switch supports only one mirror
session.
The Admin > Port Mirror window displays the current port mirror settings.
To configure port mirror, follow these steps:
Click Admin > Port Mirror.
Configure the port mirror settings.
• Source Port—Check the check box of the port whose traffic will be
monitored.
• Target Port—From the drop-down menu, select the port that will mirror the
traffic on the source port.
The Cisco SLM2008 switch supports bi-directional port mirroring (transmit
NOTE
and receive).
5
51