Cisco SLM2008PT-NA Administration Manual page 45

Advanced Configuration
QoS
STEP 4
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
DSCP
- DSCP Settings—DSCP Settings enable mapping DSCP values to
specific priority levels. The default DSCP settings are shown in the
following table:
Table 2 DSCP Settings
DSCP Value (0-63)
46
34
24
All others
• DSCP Value—Indicates the Differentiated Services Code Point value in the
incoming packet.
• Priority—Maps the DSCP value to the selected priority level.
Click Save.
Priority
high
medium
normal
low
5
40