Connecting the Cisco SLM2008 Switch
Connecting the Cisco SLM2008 Switch to the Network
STEP 3
STEP 4
STEP 5
Connecting the Cisco SLM2008 Switch to the Network
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
Insert a screw into each hole and leave 3 mm of its head exposed.
The wall-mount slots are two crisscross slots on the bottom panel of the switch.
The wall-mount slots on the switch line up with the two screws.
Wall
mount
slots
Maneuver the switch to insert the screws into the two slots.
The diagram shown here is an example of a typical network configuration.
2-1/2
3
7