Cisco SLM2008PT-NA Administration Manual page 53

Advanced Configuration
Multicast
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The Multicast > IGMP Settings window displays the current IGMP settings.
All functions listed on the Multicast > IGMP Settings window require "Enable
NOTE
IGMP Snooping" to be enabled before settings will take effect.
To configure the IGMP settings, follow these steps:
Click Multicast > IGMP Settings.
Configure the IGMP settings.
• Enable IGMP Snooping—Check the check box to enable IGMP Snooping
on the switch.
• Enable Unregistered IP Multicast Flooding—Check the check box to
enable Unregistered IP Multicast Flooding on the switch.
• VLAN ID—Displays the VLAN ID number.
• Enable IGMP Snooping—Check the check box to enable IGMP Snooping
on each VLAN interface.
• Enable IGMP Querying—Check the check box to enable IGMP Querying
on each VLAN interface.
5
48