Cisco SLM2008PT-NA Administration Manual page 24

Advanced Configuration
Port
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The Port > Port Settings window displays the current port settings of the switch.
To configure port settings, follow these steps:
Click Port > Port Settings.
Configure the port settings.
• Port—Displays the port number.
• Link Status—Displays the link status of the port.
• Mode—The current speed and duplex mode settings are displayed here.
Auto Speed is enabled by default to allow the switch to autonegotiate the
speed and duplex settings. The following capabilities are supported and
available from the Mode drop-down menu:
- Auto Speed—This option enables autonegotiation. When
autonegotiation is enabled, you do not need to specify the capabilities to
be advertised.
- 10 Half—Supports 10 Mbps half-duplex operation.
- 10 Full—Supports 10 Mbps full-duplex operation.
- 100 Half—Supports 100 Mbps half-duplex operation.
5
19