Cisco SLM2008PT-NA Administration Manual page 36

Advanced Configuration
Security
STEP 1
STEP 2
STEP 3
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The Security > 802. 1 X Parameter window displays the current 802. 1 X parameters.
To configure the 802. 1 X parameters, follow these steps:
Click Security > 802.1X Parameter.
Enter the following information:
• Enable Reauthentication—Check the check box to enable
re-authentication.
• Reauthentication Period (1-3600 seconds)—Enter the time period after
which a connected client must be re-authenticated. The default value is
3600 seconds.
• EAP Timeout (1-255 seconds)—Enter the time period during an
authentication session that the switch waits before retransmitting an EAP
packet. The default value is 30 seconds.
Click Save.
5
31