Advanced Configuration
Security
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The Security > 802. 1 X Settings window displays the current 802. 1 X settings for
the switch.
To configure the 802. 1 X settings, follow these steps:
Click Security > 802.1X Settings.
In the 802. 1 X Settings section, enter the following information:
•
802.1X Mode—Enables or disables 802. 1 X mode. From the drop-down
menu select Enabled or Disabled.
•
RADIUS IP—Enter the IP address of the server.
•
RADIUS UDP Port—Enter the UDP Port of the server. The UDP port is used
to verify the RADIUS server authentication. The default value is 812.
•
Key String—Enter the secret key string as defined on the RADIUS server.
The secret key string is used for authenticating and encrypting
communications between the device and the RADIUS server.
5
29