Configuring Ping - Cisco SLM2008PT-NA Administration Manual

Advanced Configuration
Admin
STEP 1
STEP 2
STEP 3
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

Configuring Ping

You can use a ping to see if another site on the network can be reached. Ping
sends ICMP echo request packets to another node on the network.
The Admin > Ping window displays the current ping settings.
To configure the ping settings, follow these steps:
Click Admin > Ping.
Configure the Ping Parameters.
• Target IP Address—Enter the IP address of the device you want to ping.
• Count—From the drop-down menu, select the maximum count to the target
IP address for each attempt.
• Time Out—From the drop-down menu, select the time out (in seconds)
interval if the device does not respond.
To test the ping, click Test. The test results are displayed in the Ping Results
section.
5
50