Displaying Stp Status - Cisco SLM2008PT-NA Administration Manual

Advanced Configuration
STP
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

Displaying STP Status

The STP > STP Status window displays the STP Status for Bridge ID and for each
port.
To display the STP status, follow these steps:
Click STP > STP Status.
The STP status information is displayed.
• STP Bridge Overview
- Bridge ID—A unique identifier for this bridge, consisting of the bridge
priority and MAC address (where the address is taken from the switch
system).
- Hello Time—Displays the Hello Time value as defined on the
STP > STP Settings window.
- Max Age—Displays the Max Age value as defined on the
STP > STP Settings window.
- Fwd Delay—Displays the Forward Delay value as defined on the
STP > STP Settings window.
- Topology—Displays the topology.
5
43