Table of Contents
Advertisement
TRENDnet User's Guide
Wired LAN Status Information
•
MAC Address – The current MAC address of your router's wired LAN or
interface configuration.
•
IP Address - Displays your router's current IP address.
•
Subnet Mask – Displays your router's current subnet mask.
•
DHCP Server - Display your router's DHCP server status, enabled or disabled.
Packet Statistics Information
The table displays the amount of octets, unicast, and multicast packets sent and
received on your router's WAN (Internet) interface.
Clicking Refresh at the bottom of the page will refresh the information on the status
page.
Clicking View Log will bring you to log page (Configuration > Toolbox > System
Information). See the "View your router log" section.
© Copyright 2012 TRENDnet. All Rights Reserved.
Clicking Clients List will bring you to the DHCP Clients List (Configuration > Basic Setting
> DHCP Server > Clients List). See "Set up the DHCP server on you router" section.
Current Sessions
Status > NAT Status
The router will also display the current TCP/UDP sessions. To view the current sessions,
click NAT Status.
•
ID – Displays the session number.
•
Protocol – Displays the protocol used in the session established, TCP or UDP.
•
Internal – Displays the internal IP address of the session and the local port
number used in the session established.
TW100-BRV214
60
Advertisement
Table of Contents
