Table of Contents
Advertisement
TRENDnet User's Guide
Front Panel View
© Copyright 2012 TRENDnet. All Rights Reserved.
Front Panel Button and LEDs
Reset Button – Push and hold this button for 20 seconds and release to reset
your router to its factory defaults. The LEDs will blink rapidly when the reset
process is activated.
WAN (Link/Activity) – This LED indicator is solid green when your router WAN
port is physically connected to the xDSL/Cable modem Ethernet port (also
called network port) successfully with an Ethernet cable (also called network
cable). The LED indicator will be blinking green while data is transmitted or
received through the WAN port of your router.
LAN 1-4 (Link/Activity) – These LED indicators are solid green when the LAN
ports are physically connected to your wired network devices successfully with
an Ethernet cable (also called network cable). These LED indicators will be
blinking green while data is transmitted or received through your router LAN
ports.
Status - This LED indicator is blinking green when your router is ready and
working successfully. If this LED indicator is solid green on or off, your router is
not receiving power or not working properly.
TW100-BRV214
3
Advertisement
Table of Contents
