TRENDnet TW100-BRV214 User Manual page 10

4-port vpn router

Hide thumbs Also See for TW100-BRV214:

Table of Contents

TRENDnet User's Guide

Hardware Installation

1. Verify that you have an Internet connection when connecting your computer directly

to the modem. Open your browser (e.g. Internet Explorer, Firefox, Chrome, Safari, or

Opera) and type in a URL (e.g. http://trendnet.com) in the address bar.

2. Turn off your modem.

3. Disconnect the Ethernet cable (also called network cable) from your modem and your

computer.

4. Connect one end of a network cable to your router WAN port. Connect the other end

of the network cable to your Cable modem network port.

5. Connect one end of a network cable to one of your router LAN ports (1-4). Connect

the other end of the network cable to the computer Ethernet port (also called network

port).

6. Connect the included power adapter to your router Power Port and then to an

available power outlet. Push the On/Off Power Switch on your router to the "On"

(inner) position.

7. Turn on your modem.

8. Verify that the following front panel LED indicators on your router (Status

WAN is solid green, and the LAN port for which your computer is connected is solid

green.

TW100-BRV214

and

Table of Contents