Optical Drive; Removing An Optical Drive - Dell OptiPlex 755 User Manual

Dell optiplex 755: user guide
Hide thumbs Also See for OptiPlex 755:
Table of Contents

Advertisement

Optical Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Information Guide
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.

Removing an Optical Drive

1 Follow the procedures in "Before You Begin" on page 21.
2 Remove the computer cover (see "Removing the Computer Cover" on page 168).
3 Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
NOTICE:
Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and
the cable connectors.
4 Pull up on the drive release latch and slide the drive towards the back of the computer. Then lift up to
remove the drive from the computer.
1
5 Disconnect the power and data cable from the back of the drive.
NOTE:
The power and data cables for the slimline optical drive installed in your computer are configured in
one of two ways as illustrated below.
204
Drives
.
2
1
drive release latch
2
optical drive
Product

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents