Replacing A Media Card Reader - Dell OptiPlex 755 User Manual

Replacing a Media Card Reader

3
1 media card reader
1 If you are replacing a media card reader, remove the installed media card reader (see "Removing a
Media Card Reader" on page 210), and skip to step 3.
2 If you are installing a new media card reader, perform the following steps before continuing to step 3:
Follow the procedures in "Before You Begin" on page 21.
a
Remove the computer cover (see "Removing the Computer Cover" on page 168).
b
Lay the computer on its side so that the system board is on the bottom of the inside of the
c
computer.
Remove the drive panel insert.
d
3 Align the screws on the media card reader with the bracket slots in the computer, and gently position
the drive until it clicks into place.
4 Connect the cable into the connectors on the media card reader and system board.
1
2
2 screws (3) 3 bracket rails (3)
Drives
211