Processor; Removing The Processor - Dell OptiPlex 755 User Manual

Processor

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer's electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.

Removing the Processor

1 Follow the procedures in "Before You Begin" on page 21.
2 Remove the computer cover (see "Removing the Computer Cover" on page 27).
3 Loosen the captive screw (shown in the following figure) on each side of the heat sink assembly.
CAUTION:
Despite having a plastic shield, the heat sink assembly may be very hot during normal operation. Be
sure that it has had sufficient time to cool before you touch it.
4 Rotate the heat sink assembly upward, and remove it from the computer.
Lay the heat sink down on its top, with the thermal grease facing upward.
1
.
heat sink assembly 2 captive screw housings (2)
1
2
Processor
73