Removing A Pci Card - Dell OptiPlex 755 User Manual

Connect the network cable to the connector on the network adapter card. Do not connect the
b
network cable to the integrated network connector on the back panel of the computer.
14 Install any drivers required for the card as described in the card documentation.

Removing a PCI Card

1 Follow the procedures in "Before You Begin" on page 21.
2 Remove the computer cover (see "Removing the Computer Cover" on page 90).
3 Gently rotate upward the release tab on the card-retention latch.
4 If necessary, disconnect any cables connected to the card.
5 If you are replacing a PCI Express x16 card, remove the installed card by gently pulling the release lever
away from the card until you release the securing tab from the dent in the card.
5
4
1
card
2
card-retention latch
3 system board
connector
2
3
4
card insert
5
release tab
1
Expansion Cards
109