Ps/2 Serial Port Adapter; Installing A Ps/2 Serial Port Adapter - Dell OptiPlex 755 User Manual

9 If you removed a network-adapter card connector:
Enter system setup, select Network Controller, and change the setting to On (see "System Setup"
a
on page 280).
Connect the network cable to the integrated network connector on the back panel of the
b
computer.

PS/2 Serial Port Adapter

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer's electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.

Installing a PS/2 Serial Port Adapter

1 Follow the procedures in "Before You Begin" on page 21.
2 Remove the computer cover (see "Removing the Computer Cover" on page 27).
3 Gently push the release tab on the card retention latch from the inside to pivot the latch open. The
latch will remain in the open position
1 card retention latch
.
2
1
2 alignment guide
47
Cards