Installing The Sa-Pcr Card - Alvarion BreezeNET PRO.11 Series User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
hard disk. During installation, enter the path of the distribution files whenever a
message appears asking for them.
It is highly recommended that you remove all PCMCIA cards from the
notebook prior to installing the SA-PCR card. This will help to avoid
conflicts during installation. If you have another network card installed (e.g., an
Ethernet card), you must remove it prior to installing the SA-PCR card.

4.3 Installing the SA-PCR Card

Installing the SA-PCR PRO.11 card consists of the following installation steps:
Installing the card in a PCMCIA slot
Installing the SA-PCR drivers and utilities
Section 4.3.3 provides instructions on performing initial configuration of the SA-PCR
card. Section 4.5 provides installation troubleshooting information.
Note:
User's Guide
If you are installing the card under Windows 95 or Windows 98 systems, there
are two installation options. You can install the drivers and utilities separately,
or you can use the Upgrade kit program to install all components in one
session. The Upgrade kit program is described in Section 4.7.
4-2
BreezeNET PRO.11 Series