Figure 4-3. Sa-Pcr Lan Adapter Properties Window - Alvarion BreezeNET PRO.11 Series User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
Installing the SA-PCR Drivers in Windows NT
1. Press the Windows Start button, select Settings, and then select Control
Panel. Double-click on the Network icon.
2. If the message
you want to install it now?
does not appear, continue with step 2b.
a. Click Yes and choose Wired to the network. When a list of supported
b. Click on the Adapters tab, click Add, and then click Have Disk.
3. Insert the BreezeCOM drivers diskette, enter the location of the diskette (e.g.,
A:\) and click OK.
4. From the list choose BreezeNET Wireless LAN PC card and click OK. The
SA-PCR LAN Adapter Properties window appears.
5. The default settings are memory range D0000h to D3FFFh, IRQ 11. In the
following steps we will verify that these default settings are acceptable for your
machine.
Note:
User's Guide
The Windows NT Networking is not installed. Do
network adapters appears, click Have Disk.

Figure 4-3. SA-PCR LAN Adapter Properties Window

If the SA-PCR Configuration utility is already installed, you can access it
directly by pressing Advanced.
, continue with step 2a. If this message
4-8
BreezeNET PRO.11 Series