4.5.5 Power Management Tab
The Power Management tab of the SA-PCR Configuration utility allows you to
enable/disable Power Save mode and to configure Power Save mode parameters.
Power Save mode is intended for laptops or hand-held computers, in order to
conserve battery energy. When Power Save mode is enabled, the unit "sleeps" most
of the time and "wakes up" occasionally to transmit/receive to/from the AP. This
will extend the battery life span of a laptop installed with the SA-PCR.
Note:
BreezeNET PRO.11 Series
SA-PCR PRO.11 PC Card Installation, Setup, and Management
Figure 4-12. Power Management Tab
Expect a degradation in performance of the entire cell, even if only the AP and
one station are set to Power Save mode.
4-19
User's Guide