The Radio tab contains the following parameters:
Power Level – Level of power at which the unit is operating. There are two
possibilities, Low or High.
Default Radio Status – For on the radio receives in regular mode, when off
the radio does not work at startup (e.g. when traveling in planes).
Hopping Standard –A set of rules regarding the radio transmission standard
allowed in each country. Units will work together only if set to the same
hopping standard. Use this parameter to set the unit's hopping standard to that
of the relevant country. Proprietary hopping standards can also be
implemented. Refer to Section 3.5.3.
4.5.9 Performance Tab
The Performance tab of the SA-PCR Configuration utility allows you to fine-tune
performance and roaming parameters. This tab is not visible when in User login mode.
When in Installer login mode, you can see the parameters. When in Technician login
mode, the parameters can be edited. Only major parameters are described below.
Note:
BreezeNET PRO.11 Series
SA-PCR PRO.11 PC Card Installation, Setup, and Management
All fields in this dialog box are read only.
Figure 4-16. Performance Tab
4-25
User's Guide