Installing The Stand-Alone Au/ Modular Base Station Equipment - Alvarion BreezeACCESS 900 System Manual

Chapter 2 - Installation
Installing the Stand-Alone AU/
Modular Base Station Equipment
Installation Requirements
This section describes all the supplies required to install the
Stand-Alone AU or the modular Base Station equipment, and the items
included in the installation packages.
NOTE
Before proceeding beyond this point and installing the Stand-Alone AU or the
modular Base Station equipment, the spectrum survey should already be
complete using the spectrum analysis tool provided with this equipment (special
firmware). The results of the survey will identify the specific clear channels and
polarization required to configure and operate the 900 MHz equipment. Refer to
the Breeze Access Spectrum Sweep & Analysis Utility User's Guide for detailed
instructions on performing the survey. This step is important to ensure the best
performance from the product.
Packing List for AU-E-NI-900 Stand-Alone AU
The Stand-Alone AU installation kit includes the following components:
AU-NI indoor unit
Wall mounting kit for the AU-NI
AU-PS power supply with a mains power cord
AU-RE-900 MHz Radio Unit with a connection to an external
antenna
Pole mounting kit for the outdoor unit
A Monitor cable (for configuring the served SUs)
Documentation and Utilities CD
2-2
BreezeACCESSS 900 System Manual