Overlapping Cell Configuration System Configurations; Figure 5-4. Three Overlapping Cells - Alvarion BreezeNET PRO.11 Series User Manual

Planning and Installing Wireless LANS
3. Check the Station Adapter front panel LED indicators, or the Site Survey
application of the SA-PCR card to check signal strength.
4. Make any necessary adjustments, for example:
5. Proceed to setup the other workstations.

5.1.2 Overlapping Cell Configuration System Configurations

When two adjacent Access Points are positioned close enough to each other, a part
of the coverage area of Access Point #1 overlaps that of Access Point #2. This
overlapping area has two very important attributes:
Any workstation situated in the overlapping area can associate and
communicate with either Access Point #1 or Access Point #2.
Any workstation can move seamlessly through the overlapping coverage areas
without losing its network connection. This attribute is called Seamless
Roaming.
User's Guide
Adjust the antennas
Adjust the location of the Station Adapter
Adjust the location of the Access Point

Figure 5-4. Three Overlapping Cells

5-6
BreezeNET PRO.11 Series