Ipv6 Multicast Vlan Configuration; Introduction To Ipv6 Multicast Vlan - 3Com S7906E Configuration Manual

1

IPv6 Multicast VLAN Configuration

EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
When configuring IPv6 multicast VLAN, go to these sections for information you are interested in:

Introduction to IPv6 Multicast VLAN

IPv6 Multicast VLAN Configuration Task List
Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
Configuring Port-Based IPv6 Multicast VLAN
Displaying and Maintaining IPv6 Multicast VLAN
IPv6 Multicast VLAN Configuration Examples
Introduction to IPv6 Multicast VLAN
As shown in Figure
A, Host B and Host C, belonging to different VLANs require IPv6 multicast programs on demand service,
the Layer 3 device, Router A, needs to forward a separate copy of the multicast traffic in each user
VLAN to the Layer 2 device, Switch A. This results in not only waste of network bandwidth but also extra
burden on the Layer 3 device.
Figure 1-1 Multicast transmission without IPv6 multicast VLAN
The IPv6 multicast VLAN feature configured on the Layer 2 device is the solution to this issue. With the
IPv6 multicast VLAN feature, the Layer 3 device needs to replicate the multicast traffic only in the IPv6
1-1, in the traditional IPv6 multicast programs-on-demand mode, when hosts, Host
1-1