Table of Contents
Advertisement
Section - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100 is
the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of 4.
If inconsistent data flow is a problem, only a minor
modification should be made.
Fragmentation
The fragmentation threshold, which is specified in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 46 byte setting will be fragmented before
transmission. 46 is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
WLAN Partition:
Enabling WLAN Partition prevents associated wireless clients from communicating with each other.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create higher
data loss.
D-Link DIR-68 User Manual
Advanced Wireless Settings
51
Advertisement
Table of Contents
