Network Filters - D-Link DIR-68 User Manual

Section  - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing
the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected
to the Broadband Router.
Configure MAC Select Turn. MAC. Filtering. Off, allow. MAC.
Filtering: addresses.listed.below, or deny.MAC.addresses.
listed.below from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking. Basics section in this
manual.
DHCP Client: Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
D-Link DIR-68 User Manual

Network Filters

4