Table of Contents
Advertisement
Section - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this
section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
Time Zone:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select
Daylight Saving:
enabled or disabled, and enter a start date and an end
date for daylight saving time.
Enable NTP
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network of
Server:
computers. Check this box to use a NTP server. This
will only connect to a server on the Internet, not a
local server.
NTP Server Used:
Enter the NTP server or select one from the drop-
down menu.
Manual:
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click Set.Time. You can also click
Copy.Your.Computer's.Time.Settings.
D-Link DIR-68 User Manual
Time Settings
56
Advertisement
Table of Contents
