Connect.to.a.wireless.network; Using Windows ® Vista - D-Link DIR-68 User Manual

Section 4 - Security
Connect to a Wireless Network
Using Windows Vista
® ™
Windows Vista users may use the built-in wireless utility. If you are using another company's utility or Windows 000, please refer
® ™ ®
to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey"
option similar to the Windows Vista utility as seen below.
® ™
If you receive the Wireless.Networks.Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-
right corner next to the time). Select Connect.to.a.network.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking.Basics
section in this manual for more information.
D-Link DIR-68 User Manual 78