Table of Contents
Advertisement
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless
connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.. Log into the web-based configuration by opening a web browser and entering the IP address of the router (19.168.0.1). Click
on.Setup.and then click.Wireless.Settings on the left side.
. Next to Security Mode, select WPA-Enterprise.
. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto
if you have wireless clients using both WPA and WPA.
4. Next to Cypher Type, select TKIP.and.AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed (600
is default).
6. Next to Authentication Timeout, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
7. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
D-Link DIR-68 User Manual
76
Advertisement
Table of Contents
