D-Link DIR-68 User Manual page 88

Section 6 - Troubleshooting
You should start at 147 and work your way down by 10 each time. Once you get a reply, go up by  until you get a fragmented
packet. Take that value and add 8 to the value to account for the various TCP/IP headers. For example, lets say that 145 was the
proper value, the actual MTU size would be 1480, which is the optimum for the network we're working with (145+8=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (19.168.0.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the
device.
• Click on Setup and then click Manual.Configure.
• To change the MTU enter the number in the MTU field and click Save.Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of
ten.
D-Link DIR-68 User Manual 88