Table of Contents
Advertisement
Section - Configuration
The Routing option is an advanced method of customizing specific routes of data through your network.
Destination IP:
Enter the IP address of packets that will take this
route.
Netmask:
Enter the netmask of the route, please note that the
octets must match your destination IP address.
Gateway:
Enter your next hop gateway to be taken if this route
is used.
Metric:
The route metric is a value from 1 to 16 that indicates
the cost of using this route. A value 1 is the lowest
cost and 15 is the highest cost.
Interface:
Select the interface that the IP packet must use to
transit out of the router when this route is used.
D-Link DIR-68 User Manual
Routing
50
Advertisement
Table of Contents
