Table of Contents
Advertisement
Section - Configuration
This page displays the current information for the DIR-68. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to
drop the PPPoE connection and use Connect to establish the PPPoE connection.
General:
Displays the router's time and firmware version.
WAN:
Displays the MAC address and the public IP settings for the router.
LAN:
Displays the MAC address and the private (local) IP settings for the router.
Wireless LAN:
Displays the wireless MAC address and your wireless settings such as SSID
and Channel.
LAN Computers:
Displays computers and devices that are connected to the router via Ethernet
and that are receiving an IP address assigned by the router (DHCP).
D-Link DIR-68 User Manual
Device Information
64
Advertisement
Table of Contents
