Screen Saver - Omron NS-RUNTIME - SOFTWARE User Manual

5-6 Initialization/Setting Screen

Screen Saver

This function is used to turn OFF the monitor power when operations are not performed for a
set period of time.
The screen saver start-up time can be set to between 1 and 99 minutes.
Set the screen saver movement by using operations from the PT Settings Tab Page as
follows.
1. Select either OFF or Display Erased for the screen saver.
2. When selecting the Display Erased is selected, set the Screen Saver Start-up Time to
between 1 to 99 minutes. The value can also be input with a keypad that is displayed by
clicking the keyboard button.
3. After setting, click the Write Button to save the setting. (For details on the write button,
refer to Writing on page 5-29.)
N o t
N o t
N o t
Clicking any part of the display will cancel the screen saver and display the previously displayed
screen. When canceling the screen saver, If the part of the display corresponds to the input for
a functional object, the screen saver will only be cancelled. The input for the functional object
will not be processed.
Key Press Sound
This function is used to set whether an input sound is heard when the touch switches that
allow input functions for the NS-Runtime are clicked.
ON:
OFF: Input sound is not heard when the touch switches that allow input functions for the
Set the key press sound by using operations from the PT Settings Tab Page as follows.
1. Select either ON or OFF for the touch switch input sound.
2. After setting, click the Write Button to save the setting. (For details on the write button,
refer to Writing on page 5-29.)
5-26
e
e
e
Input sound is heard when the touch switches that allow input functions for the NS-
Runtime are clicked.
NS-Runtime are clicked.