Omron NS-RUNTIME - SOFTWARE User Manual page 120

5-6 Initialization/Setting Screen
No
3
4
5
2. After setting, click the Write Button to save the setting. (For details on the write button,
refer to Writing on page 5-29.)
3. To change the password, click the Password Button.
N o t
N o t
N o t
When changing passwords, do not end the NS-Runtime until the write operation has been
completed (until a write completion message is displayed). If the password is not saved
properly, the screen may malfunction.
The password settings can also be made from the CX-Designer.
If the password is forgotten, it cannot be checked from the NS-Runtime. Check the
password using the CX-Designer.
5-36
Item
Timeout (min)
When the Timeout Option is set to ON, this setting specifies the
timeout time in minutes (1 to 60 minutes).
Switch screen Click the ON or OFF Button to specify whether the screen is
when canceling automatically switched to a specified screen when authentication is
authentication. canceled.
This option can be set when the password with levels function has
been turned ON.
ON The screen is switched to the specified Switch Screen No. when
authentication is canceled.
OFF The screen is not switched when authentication is canceled.
Switch Screen If the switch screen when authentication is canceled has been turned
No. ON, the screen is changed to the screen number set here when
authentication is canceled.
e
e
e
Function