Configuring Basic Wireless (Wifi) Settings; Network Settings Options; Wifi Setup Wizard; Connecting To A Listed Network - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Configuring basic wireless (WiFi) settings

Note:
its security string to connect your printer to the network successfully.
Caution:
of the printer, unplug it before starting this task.
1
From the control panel, press
2 Press
3 If you see the setting displaying the message:
4
As needed, press

Network Settings options

If the printer has not been configured to connect to the WiFi network or the printer WiFi
radio is turned off, the LCD display displays the options below:
Menu Options

WiFi Setup Wizard

Turn WiFi Radio On / Off
View Network Configuration
Print Network Configuration
Manual IP Address
WiFi Setup Wizard
Review the procedures below and use the one that suits your network setup.

Connecting to a listed network

1 Complete Steps 1 and 2 of "Configuring basic wireless (WiFi) settings" on page 27.
WiFi Setup Wizard
2
Note:
selected.
3 The printer searches for available WiFi networks within range; then displays the list in
alphabetical order on the LCD. The illustration below shows an example list. The row
containing each <Network name> listed also shows the strength of the signal (shown
below as xx%) as a percentage between 0 and 100, where 100 is the highest possible
strength.
•
If more WiFi networks are within range than can be shown on the LCD, the display
includes the
Kodak ESP 9 Printer User Guide
You will need to know the network name (SSID) of the WiFi network, and
If there is an Ethernet cable plugged in to the Ethernet port on the back
Menu
Network Settings
until
, , or
is the first option; press
The WiFi radio is turned on automatically when
(page down) symbol and/or the
.
is selected, and then press
Turn WiFi Radio On
to view or configure an item, and then press
Settings / Action
Press OK to start the Wizard.
Press OK to toggle between the WiFi radio on or off
states.
Press OK to view the configuration on the LCD display.
Press OK to print the network configuration.
Press OK to display the Manual IP Address menu.
OK
to select it.
(page up) symbol on the LCD.
Chapter 3
OK
.
OK
, press now.
OK
WiFi Setup Wizard
is
.
27