Using Quick Dial To Select A Fax Phonebook Entry; Specifying A Quick Dial Recipient From The Keypad - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Hide thumbs Also See for ESP 9 ALL-IN-ONE PRINTER:
Table of Contents

Advertisement

4
To use the last fax number used, press
recipient is selected, and then press
The Fax phone number of the selected entry displays in the menu header, replacing any
previous number. See the illustration below.
Start
5
Press

Using Quick Dial to select a Fax Phonebook entry

By assigning up to ten contacts in your Fax Phonebook with a number between 0 (zero)
and 9, the Quick Dial feature in your ESP 9 All-in-One printer allows you to create
shortcuts for quickly sending Faxes to them.
Note:
entries" on page 67.
There are two ways to use the Quick Dial feature for sending faxes.

Specifying a Quick Dial recipient from the keypad

1
Load the original. As appropriate review "Preparing a fax for transmission" on page 69.
2
From the control panel, press
3
Press
4
Select the appropriate key on the control panel's keypad associated with the Quick Dial
entry, and then press
Dial value of "08." See the illustration below.
Kodak ESP 9 Printer User Guide
to send the fax.
To configure a fax recipient as a Quick Dial entry, review "Fax Phonebook
Menu
Send Fax
to select
and then press
Start
. For example, press
Start
now. Otherwise, press
OK
.
.
OK
.
8
to specify the entry assigned the Quick
Chapter 8
until the desired
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esp 9

Table of Contents