Connecting The Printer To A Digital Subscriber (Dsl) Telephone Line - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Hide thumbs Also See for ESP 9 ALL-IN-ONE PRINTER:
Table of Contents

Advertisement

Setting Up Your Printer
port on your printer. Do not connect the answering machine to the
your printer. .
If you have a separate fax line on that does not receive any voice calls, connect your printer
to the phone line as described below.

Connecting the printer to a digital subscriber (DSL) telephone line

If you use a digital subscriber line (DSL), you must connect a DSL filter between the
telephone wall jack and your Kodak All–in–One printer. Without the DSL filter for your
digital subscriber line, you not be able to send and receive faxes.
1
Obtain a DSL filter from your DSL provider.
2
Connect the one end of the phone cord supplied with your Kodak ESP 9 All–in–One
printer to the open port on the DSL filter, and the other to the printer port labeled
Line-In
number of rings set in the
on page 35.
3
If you use an answering machine, connect your answering machine to the port labeled
EXT-Out
your answering machine.
Caution:
rings set in the
the printer detects there is an incoming fax. See "Specifying Rings to Answer" on
page 35.
34
.When the phone rings your printer is set to answer automatically after the
Rings to Answer
on your printer. This provides a direct connection between the printer and
When the phone rings, your printer will answer after the number of
Rings to Answer
setting. See "Specifying Rings to Answer"
setting. The incoming fax will be received when
Kodak ESP 9 Printer User Guide
EXT-Out
port on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esp 9

Table of Contents