Configuring Printer Settings - Kodak HERO 5.1 Extended User Manual

Printer Overview

Configuring printer settings

5
To set or change basic printer settings:
1. Press Home .
2. Press to select Printer Settings , then press OK .
3. Press to select one of the following settings:
• Date and Time
– Press OK , then press
Press or
NOTE: You can also synchronize the printer date and time to your computer
using Home Center Software.
• Time to Low Power
To conserve energy, your printer will enter a low power (sleep) mode after
being idle for a default delay time of 1 hour. You can increase the delay time to
low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time
may result in reduced energy savings.
– Press to change the time to energy-saving sleep mode (select from 1 to
4 hours in 0.5 hour increments).
• Tagged Images Printing (see
– Press to select Off or On .
• Language
– Press OK , press
• Country/Region
– Press OK , press
• Reset All Settings (see
NOTE: Resetting factory defaults does not change the date and time,
language, country/region, or network settings.
• Printer Info
– Press OK to display the version of firmware that is currently running on
your printer.
• Features Demonstration
– This feature is typically used by retailers to demonstrate the printer's
features.
4. Press Back to return to the Main Menu.
www.kodak.com/go/aiosupport
to select Year , Month , Day , Hour , or Minute .
to change the values; press OK when you are done.
Printing tagged pictures, page
to select a language, then press OK .
to select a country or region, then press OK .
Resetting factory defaults, page
51)
95)