Kodak ESP 9 ALL-IN-ONE PRINTER User Manual page 27

Light Status
Off
Blinks
On
Light Status
Off
Blinks (slow)
The LCD display
describes the
error.
Blinks (fast)
On
Kodak ESP 9 Printer User Guide
Memory Card Slot Light
Cause
Either the memory card is not
inserted or is improperly inserted in
the card slot.
The internal card reader is
initializing or communicating with a
memory card.
A memory card is properly inserted
in the card slot.
Attention Light
None.
Paper jam.
Paper tray empty.
Paper carriage stall.
Paper size or type mismatch.
Change ink cartridge.
Ink cartridge not readable.
Printhead not calibrated.
Unit open, scanner lid open, rear access door open.
Too many image sources.
Printhead not installed.
Unable to read memory card or USB host device.
Ink cartridge(s) inserted incorrectly.
Ink cartridge(s) not installed.
Media sensor failure.
Printhead failure.
Scanner failure.
Action/Solution
Remove and reinsert the memory card.
None.
None.
Error
Chapter 2
19