Environment; Regulatory Compliance; Fcc Compliance And Advisory - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Product and Safety Specifications
Warning:
this risks damaging the equipment and injuring people.

Environment

Caution:
Caution:
Caution:
damage that will require replacement or repair by a qualified technician to
restore normal operation.
Warning:
Kodak alternating current (AC) adapters are intended for indoor use only. The use
of controls, adjustments, or procedures other than those specified herein may
result in exposure to shock and/or electrical or mechanical hazards.
Caution:
instructions.
For more information, go to www.Kodak.com/go/MSDS.

Regulatory Compliance

FCC Compliance and Advisory

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
114
Do not place your printer on an unstable cart, stand, bracket, or table;
Excessive dust levels may damage internal parts.
Unplug the equipment from the electrical outlet before cleaning.
Dropping your printer may damage the housing and result in extensive
Do not expose this product to liquid, moisture, or extreme temperatures.
Adjust only those controls covered in the user guide or setup
Kodak ESP 9 Printer User Guide