Kodak ESP 9 ALL-IN-ONE PRINTER User Manual page 46

Setting Up Your Printer
When the
sion. Using this feature, the All-in-One printer will automatically re-transmit the fax.
Although the Error Correction mode increases send time on poor phone lines, the fax is
transmitted much more reliably.
Note:
in-One printer. This feature does not affect the reliable transmission of faxes being
received.
1 From the control panel, press
2 Press
3 Press
4 As needed, press
name and telephone numbers.
5
As needed, press
OK
6 Press
38
Error Correction
mode is enabled, the printer detects errors during transmis-
Error Correction is only applied to black-and-white faxes sent from the All-
Menu
Fax Settings
until is selected, and then press
until the option you want to configure is selected, and then press
or to set the desired sub-setting, as in configuring your sender
or to change the setting.
to save the setting(s).
.
OK
.
Kodak ESP 9 Printer User Guide
OK
.