Trouble-Shooting Guide - NEFF U 1644 Series Operating And Fitting Instructions Manual

Trouble-shooting Guide

Calling the customer service is not always really necessary. In some cases, you can
remedy the situation yourself. The following table may contain some helpful tips.
Important general safety guidelines:
Service or repair work on the electronic components may only be performed by a
qualified expert. Without exception, prior to starting such repairs, the appliance must
be disconnected from the mains. This may be accomplished by tripping the
automatic fuse or by removing the fuse from the fuse box that controls your flat or
apartment.
Problem
. . . if there is a general failure of Defective fuse
all electrical functions, i.e., the
control lamps have suddenly
ceased to function.
. . . if liquids or thin viscous
dough are distributed at a
visibly uneven thickness?
. . . if the oven suddenly stop
functioning?
. . . if the oven suddenly stop
functioning?
. . . if the oven suddenly stop
functioning and the electronic
clock flashes 0:00?
. . . if rrr is displayed?
. . . if a foreign language is
indicated on the display.
Possible cause
The appliance has not
been placed or installed
plumb-and-level.
The electronic clock is
set to an automatic
timing cycle.
Automatic timer
switched OFF oven.
The power supply was
briefly interrupted.
The power supply was
briefly interrupted.
Wrong operating
language set or the
power supply was
briefly interrupted.
Remedy
Check the fuse in the fuse box, and
replace if required.
Level the appliance using the leveling
feet, or check the installation.
Set electronic clock to operation
without automatic timer:
1. Press the : button.
to 0:00.
2. Reset ON time
?
Set electronic clock to operation
without automatic timer:
Press the : button.
Reset the time of day.
Re-activate the electronic clock and
oven control.
Select new language.
(see "Language for the text display").
51